MDC-1200 PTT ID display AS3

[bradlington]

Can someone assit in answering me regarding MDC:1200 AS3 to display the codes on the screen.

Astro saber 3 : MDC-1200 working well and paging etc all good.

Any ideas on settings for the ID:displaying code .

Thnaks in advance

Brad

[Batwings21]

What is the flashcode of your radio, get it then run it through a flashcode decoder, you must have h14, digital id display, or it will not display.

[bradlington]

Mfg Code(FLASH PORT ): 0000010000009

Power-up test: AP_R03.33.00
DSP N05.01.04
EMC 2.012
KG1-DES
KG2-NONE
H04RDH9PW7AN

I am sure I did check and do not remember the H14 package.

[txshooter]

Decoding Flashcode: 000001-000000-9

H35 Conventional Systems Operation


<A HREF="http://www.akardam.net/moto/decode3.pl">Decoded by akardam.net FC Decoder</A>

Conventional Only nother other options. No, you do not have H14. You also have extremely old firmware and most likely a 512K radio. Not a 1 Meg unless the radio is marked as 1 Meg.
Great radio for conventinal use.

[bradlington]

Thanks for that - I know it is old but when I got it it was last programmed in DEC 1999 .

These radios had not been used , so I have mint radios but old Firmware .Digital at the moment really sounds good.

I cant be fussy as I am sure I am the only amateur in the country playing with commercial digital .

Thanks for the help.

Brad

http://groups.yahoo.com/group/ASTROdigital_X