Quantar Multi-NAC Table

This forum is for discussions regarding System Infrastructure and Related Equipment. This includes but is not limited to repeaters, base stations, consoles, voters, Voice over IP, system design and implementation, and other related topics.

Moderator: Queue Moderator

Post Reply
kb1jrx
Posts: 7
Joined: Mon Aug 30, 2004 7:03 pm

Quantar Multi-NAC Table

Post by kb1jrx »

Anyone have the Multi-NAC table feature working? I have it enabled and placed 1 NAC in the table of 8, but the system won't key on P25. Works fine for analog keying. If I set the Multi-NAC to Disabled and go back and enter the NAC code in the non-table screen all works fine. Is this a feature that should work? Is it dependent of a firmware revision? I am running 2002 boot 20.10.12 Control Firmware 20.12.008.
I have tried Code plug 13 and 14 to get the multi NAC, but am currently using 12 (no multi NAC option). Just wondering if this is a real feature. Thanks.

--Andy
Top
Post Reply

Return to “Base Stations, Repeaters, General Infrastructure”