Minitor 2 Amplified Charger modification

This forum is focused on discussing Digital and Voice paging equipment, protocol's, infrastructure, and Motorola specific hardware used. Please refrain from discussing different ways to monitor the digital paging systems due to the legalities of such.

Moderator: Queue Moderator

Post Reply
libuff
Posts: 371
Joined: Fri Mar 25, 2005 5:21 pm

Minitor 2 Amplified Charger modification

Post by libuff »

Hello all,
my company uses a modified Minitor 2 amplified charger to interface our Minitor 2 (non-sv) into a CDM-1550xls which rebroadcasts on our UHF repeater system. our Minitor 2 is VHF.

the patch cable extracts audio from the 5 pin connector, however i am understanding that the 5pin doesn't naturally have audio. PLUS the relay within the amp charger normally has a closure of about 10-11 seconds when the pager is activated, we had it modified for about 30 seconds by changing a cap.

does anybody have detailed information about these modifications, we have had that amp charger in repair, and the repair company may not know where it is... it is quite essential to get our UHF system the patch from our VHF minitor.

OR does anybody else know of such a system? or somethign we can setup?
Top
Post Reply

Return to “Motorola Digital and Voice Paging”