HELP!! HT1250 1 Channel wont transmit
Moderator: Queue Moderator
-
kgeb3855
- New User
- Posts: 2
- Joined: Tue Oct 30, 2007 5:13 am
- What radios do you own?: Ht1000,HT1250,HT750,CDM1550
HELP!! HT1250 1 Channel wont transmit
I have one of our departments ht1250 radios that wont transmit on channel 1 it transmits fine on all other channels. when you key up on channel 1 the red led lights up as if it is transmitting but nothing is sent we tried reprogramming it with a code plug from a radio that works fine but still nothing.
-
HLA
- Posts: 2334
- Joined: Mon Jul 11, 2005 8:15 pm
- What radios do you own?: HT1550's, X9000's, CDM1550's
Re: HELP!! HT1250 1 Channel wont transmit
email me the codeplug and i'll look at it if you can't find it. make shure it's not a recieve only channel and make shure you have the correct pl/dpl.
HLA
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
-
kgeb3855
- New User
- Posts: 2
- Joined: Tue Oct 30, 2007 5:13 am
- What radios do you own?: Ht1000,HT1250,HT750,CDM1550
Re: HELP!! HT1250 1 Channel wont transmit
What I did was reprogram channel 1 with a different freq and it works fine , then i copied its code plug to a different radio and it worked fine with the original channel 1 freq. so then i programmed it all back the way it was and still no transmit