Jeep Liberty install question
Moderator: Queue Moderator
-
- Posts: 52
- Joined: Sat May 08, 2004 6:26 pm
- What radios do you own?: cdm1550ls, maratrac, Pro9150,
Jeep Liberty install question
Ok our Code Enforcement Officer is getting a hand me down 2005 Jeep Liberty. Question is where to mount a 2-way radio and switch box besides on the side of the center console If at all possible. If you have comments or suggestions let me know also if you have done an install i would like to see pics of them. Also the equipment is not picked out yet so it could be anything with in reason.
- firefighter13669
- New User
- Posts: 110
- Joined: Sun Jun 24, 2007 8:09 am
- What radios do you own?: M1225,F3161,F70,F5061,F33,F50V
Re: Jeep Liberty install question
What type of radio and switch box.Need to know the size that would help
KC2VHB
-
- Posts: 52
- Joined: Sat May 08, 2004 6:26 pm
- What radios do you own?: cdm1550ls, maratrac, Pro9150,
Re: Jeep Liberty install question
The equipment has not been picked out or purchased so anything with in reason.
Last edited by smk8er on Thu Dec 06, 2007 1:39 pm, edited 1 time in total.
Re: Jeep Liberty install question
My wife has a Liberty that I had 2 ICOM F121/221 mobile units in. As you said they were mounted to the side of the ceter console. I just replaced the 121 with the new ICOM F5061 remote head, and mounted the head right on top of the console in front of the shifter. It loks good there, and the harness snuck thru the pocket behind it. I didn't use a switch pack for her, but have 3 rocker switches on the dash panels. In between the upper and lower dash there are 2 small pieces that pop off. It was ideal for the switches, and I can replace them for $10 when she gets rid of it. I put relays on the switches even though I run LED units.
The first thought for the radio was on her old cell phone tab that comes out from next to the radio, but didn't like what it looked like.
JAS
The first thought for the radio was on her old cell phone tab that comes out from next to the radio, but didn't like what it looked like.
JAS
KB2ZTX
-
- New User
- Posts: 6
- Joined: Sun Jul 20, 2008 7:58 pm
- What radios do you own?: HT1250, CDM1250 with remote
Re: Jeep Liberty install question
I was just wondering if ya had any pictures of that install?My wife has a Liberty that I had 2 ICOM F121/221 mobile units in. As you said they were mounted to the side of the ceter console. I just replaced the 121 with the new ICOM F5061 remote head, and mounted the head right on top of the console in front of the shifter. It loks good there, and the harness snuck thru the pocket behind it. I didn't use a switch pack for her, but have 3 rocker switches on the dash panels. In between the upper and lower dash there are 2 small pieces that pop off. It was ideal for the switches, and I can replace them for $10 when she gets rid of it. I put relays on the switches even though I run LED units.
The first thought for the radio was on her old cell phone tab that comes out from next to the radio, but didn't like what it looked like.
JAS