Minitor V and Amp charger

This forum is focused on discussing Digital and Voice paging equipment, protocol's, infrastructure, and Motorola specific hardware used. Please refrain from discussing different ways to monitor the digital paging systems due to the legalities of such.

Moderator: Queue Moderator

Post Reply
User avatar
jban
Posts: 385
Joined: Tue Nov 23, 2004 8:26 am
What radios do you own?: AS mob, ASIII, XTS/XTL

Minitor V and Amp charger

Post by jban »

We recently purchased the 2 channel Minitor V with the amp charger. Problem: Pager is in charger. Alert is recieved. Sometimes,voice will not come over amp charger (pagers work fine out of charger). Also, once page is complete the amp squelch tails intermit. for about 2 minutes.

All pagers are experiencing this problem. We do have the pagers set to alert in silent scan mode.

Any suggestions or do I need to contact factory about their NEW product!
Top
KB2ZTX
was jsikora
Posts: 269
Joined: Wed Jun 11, 2003 9:38 am

MV

Post by KB2ZTX »

We had the same problem in the amp chargers on squelching. Solution was adjust the squelch up a bit. For some reason even in monitor they would make noise. Adjusted it up 2 and everything fine. As for the no audio, the only problem we found was units not snapped all the way in the charger.

JAS
Top
User avatar
jban
Posts: 385
Joined: Tue Nov 23, 2004 8:26 am
What radios do you own?: AS mob, ASIII, XTS/XTL

Minitor V

Post by jban »

Thanks. I will bump one up a bit and see how it does.
John B
Top
User avatar
jban
Posts: 385
Joined: Tue Nov 23, 2004 8:26 am
What radios do you own?: AS mob, ASIII, XTS/XTL

Re: Minitor V and Amp charger

Post by jban »

Was talking to a /\/\ rep the other day while on another issue. He looked up and found that there was a recall on the version "A" & "B" series M5 amp chargers. They sent us 50 brand new version "C" units at no cost. This recall expires end of December 2007.
John B
Top
Post Reply

Return to “Motorola Digital and Voice Paging”