CDM1250 Help Needed asap Please
Moderator: Queue Moderator
CDM1250 Help Needed asap Please
I have a CDM1250 UHF I am trying to program, and am trying to use an adapter that on one end looks like an RJ45, and the other end goes to my serial DB9 com port. I was told by a radio tech this would work, but what kind of cable do I need to plug into the part that looks like an rj45 that goes from there to the radio's mic port? I tried an ethernet cable, and had no luck. Sorry if this is a dumb question, but I am new to programing this radio. Thanks. Any help is appreciated.
-
Tom in D.C.
- Posts: 3859
- Joined: Tue Sep 04, 2001 4:00 pm
- What radios do you own?: Progreso soup can with CRT
Re: CDM1250 Help Needed asap Please
Most Motorola radios require a special cable and Radio Interface Box.
You probably should read up on this before going further.
Try http://www.batlabs.com under Model Specific Information. The info
you need is toward the bottom of the CDM1250 page/section.
You probably should read up on this before going further.
Try http://www.batlabs.com under Model Specific Information. The info
you need is toward the bottom of the CDM1250 page/section.
Tom in D.C.
In 1920, the U.S. Post Office Department ruled
that children may not be sent by parcel post.
In 1920, the U.S. Post Office Department ruled
that children may not be sent by parcel post.