MotoTRBO CPS

[KMB]

Hello,

I would like to know that what is the CPS cer. for XPR6500?
As I got a CPS Ver.2 Build 67, can this use to programme them?

Thank you!

KMB

[KMB]

Any help..............................

[wavetar]

Yes, it should work fine. Here is an excerpt from the 'readme' file, which details the different versions which have become available since TRBO was launched:

Version
Notes

3.0 (Build 80)
Support for additional UHF/VHF high/low power models.

Support for searching the controls on the configuration view.

Support for getting to the selected channel from the list of channels on the zone configuration view using “Go to” feature.

Configuration of the GPIO Pins has been changed from logical pin numbers to actual physical pin numbers. Opening old archives will result in reordering of the logical pin numbers to the physical pin numbers (actual operation will not be affected). Refer to online help for the pin number mapping.

2.0 (Build 67)
Support for VHF high power models.

1.0 (Build 59)
Support for the MOTOTRBO UHF radios.

Drag and drop support between models.

Support for renaming channels, systems, calls and lists.

Support for multiple selection configuration. For example, create several Digital Channels and select them all in the tree view and set the Slot of all the Digital Channels to the same value at once.

Support for custom views and undo/redo.

Support for loading language packs in the radio to navigate radio menu and features in different languages.

Support for firmware and codeplug upgrade using the device update feature.

[KMB]

Thank you very much Wavetar!

Is that means my "Version 2 Build 67" also can programme XPR6550/XPR6500 series??

As I read the "readme" file that states it support Asia version radios, such as Xi PR8268....etc.
I heard from others, does MotoTRBO CPS also like Professional HT/CDM series that have different zone CPS for different zone radios?

Can we build the programming cable following the service manual??

Please help me from the dark!


KMB

[wavetar]

Yes, all current MotoTRBO radios are programmed with the same CPS software package. I assume there are various different versions for North American versus overseas radios.

[KMB]

Sorry that means there is universal version of MotoTRBO or have different version?
Thank you!

[wavetar]

Sorry that means there is universal version of MotoTRBO or have different version?
Thank you!

All NORTH AMERICAN MotoTRBO radios use the same "universal" CPS. BUT I assume other parts of the world use a different "universal" CPS. Maybe someone else can confirm this.

Todd

[KMB]

Thank you very much, wavetar!

[KMB]

Oh..........I use the PMKN4013B to read the radio but it said "Error #1057 Region not support" by using "Version 2 Build 67".
Does any method to overcome it?
Any methods such as edit the CPS region code like HT/CDM??



KMB