Anyone have a good handle on the correct sequences and/or problems with the Waris toolkit? I have been given a bunch of Ht1250 full and limited keypad AAH25RDF/RDH radios and all have been messed with....I do NOT have clean codeplugs and cannot seem to get the toolkit to work correctly...they all have 5.00.xx firmware....have tried to flash firmware up (i have the adapter) but get errors there too....if anyone has suggestions, I appreciate any help. I may also be looking for a valid codeplug for AAH25RDF9AA5 and AAH25RDH9AA6 radios....US spec.
Thanks
Mike
HT1250 Flash Sequence Question
Moderator: Queue Moderator
-
HLA
- Posts: 2334
- Joined: Mon Jul 11, 2005 8:15 pm
- What radios do you own?: HT1550's, X9000's, CDM1550's
Re: HT1250 Flash Sequence Question
start at the beginning, what happens when you try to read the radios with the factory un-altered cps?
HLA
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
Re: HT1250 Flash Sequence Question
1 - Write the lab codeplug
2 - Flash the firmware
Simple as that. Sometimes it works, sometimes it doesn't.
2 - Flash the firmware
Simple as that. Sometimes it works, sometimes it doesn't.
Jake