Is there a way to turn off priority channel checking in the Maxtrac? When it is scanning it annoyingly checks the first channel in the scan list every second causing the other frequencies to cut out every second.
-Adam
Maxtrac Priority Scan Disable?
Moderator: Queue Moderator
-
kf4sqb
- Posts: 1500
- Joined: Mon May 19, 2003 9:11 pm
- What radios do you own?: I can't enter that much....
Re: Maxtrac Priority Scan Disable?
According to what I'm seeing in the RSS, no, you can't.
brett "dot" kitchens "at" marel "dot" com
Look for the new "Jedi" series portables!
Bat-Phone= BAT-CAVE (2283)
-.- .. ....- -.-. -.-- . .. ... -- -.-- -... .-. --- - .... . .-. .-.-.-
Look for the new "Jedi" series portables!
Bat-Phone= BAT-CAVE (2283)
-.- .. ....- -.-. -.-- . .. ... -- -.-- -... .-. --- - .... . .-. .-.-.-
Re: Maxtrac Priority Scan Disable?
Hit select until you only have the 2 lower bars.
If you cant do that, try setting the scan list from the front panel vs rss.
Don't select a priority ch.
Read thru this;
http://batboard.batlabs.com/viewtopic.php?t=12255
If you cant do that, try setting the scan list from the front panel vs rss.
Don't select a priority ch.
Read thru this;
http://batboard.batlabs.com/viewtopic.php?t=12255