Changing a HT1250 from UHF to VHF

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
nick.dejohn
Posts: 314
Joined: Sun Feb 22, 2004 6:06 pm
What radios do you own?: EX560-XLS CDM1550

Changing a HT1250 from UHF to VHF

Post by nick.dejohn »

As the title says above, can it be done through HEX Editor???
Nick
Top
Grog
On Moderation
Posts: 783
Joined: Sat Nov 17, 2001 4:00 pm

Re: Changing a HT1250 from UHF to VHF

Post by Grog »

nick.dejohn wrote:As the title says above, can it be done through HEX Editor???

Don't you think there might be a few parts that need to be changed as well?
Top
User avatar
HLA
Posts: 2334
Joined: Mon Jul 11, 2005 8:15 pm
What radios do you own?: HT1550's, X9000's, CDM1550's

Re: Changing a HT1250 from UHF to VHF

Post by HLA »

i'm shure there is a way to force it to be any band but it won't work without alot of internal modification
HLA
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
Top
libuff
Posts: 371
Joined: Fri Mar 25, 2005 5:21 pm

Re: Changing a HT1250 from UHF to VHF

Post by libuff »

take off the case, remove all UHF electronics, replace with the electronics from a VHF radio, re-power... about the only way easily feasible to make the modification...

you would need to do some serious modifications...
Top
nick.dejohn
Posts: 314
Joined: Sun Feb 22, 2004 6:06 pm
What radios do you own?: EX560-XLS CDM1550

Re: Changing a HT1250 from UHF to VHF

Post by nick.dejohn »

Forget that. I thought it would be easier to do than that.

Never mind!
Nick
Top
User avatar
Mfire39
Moderator
Posts: 1331
Joined: Sat Jan 17, 2004 8:53 am
What radios do you own?: APX

Re: Changing a HT1250 from UHF to VHF

Post by Mfire39 »

Since the Pro series utilizes a uni-board, it would make life alot easier to just get a VHF board, or a whole differrent radio.. Can't just swap out the RF section and blow a plug in like you can with others...

-Marc
Stupidity creates job security!

If your radio has old firmware, programming it with the latest CPS will not add any new features unless you have the latest firmware to match..

CPS = Customer Programming Software, Not CPS Software.
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”