I recently programmed a UHF Spectra A9, and I get a "mode 0" error on the display when powering up which prevents me from using the radio. Any idea what this means?
Thanx
Spectra A9 Mode 0
Moderator: Queue Moderator
- PropellorHead
- was LACityFD
- Posts: 220
- Joined: Mon Dec 09, 2002 10:35 pm
- What radios do you own?: XTS 5000 to Mocom
Re: Spectra A9 Mode 0
Was this head and radio properly programmed by you in the past. Mode 0 on an A9 head usually means a programming mismatch between the head and the radio.
Jason
Jason
- PropellorHead
- was LACityFD
- Posts: 220
- Joined: Mon Dec 09, 2002 10:35 pm
- What radios do you own?: XTS 5000 to Mocom
Re: Spectra A9 Mode 0
I am programming it for somebody else. The head already had the error code when given to me. Should I try and put a clean codeplug into the radio?
Re: Spectra A9 Mode 0
What is the model # of the control head and what control head type does it show in the programming?
Jason
Jason
Re: Spectra A9 Mode 0
READ the radio AND control head first, then change the freq's ect and write back into the radio.