We have HT-1250's and wanted to know if we could so something.
I know that you can do selected channel and revert with emergency buttons. We are trying to have the emergency button go to our FAO when we are on our channel but when on any other channel we are hoping to have it revert to a county mutual channel that has all our ID's programmed. I don't think it is possible but figured i would ask.
Thanks
Emergency Button HT-1250
Moderator: Queue Moderator
Re: Emergency Button HT-1250
Unfortunately, you are correct. The Emergency Revert Channel is a global setting accross all signaling systems.
Amateurs train until they can do it right. Professionals train until they cannot do it wrong.
-
HLA
- Posts: 2334
- Joined: Mon Jul 11, 2005 8:15 pm
- What radios do you own?: HT1550's, X9000's, CDM1550's
Re: Emergency Button HT-1250
the only other option is to turn the revert off and it will broadcast the emergency signal on whatever channel it is currently on.
HLA
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
Re: Emergency Button HT-1250
So setup 2 MDC personalities... both identical except for your channel, leave it on selected, on the others put it to revert to the M/A channel... Make sense?
Re: Emergency Button HT-1250
You cannot do that with the HT1250. You can only have one revert setting for all signaling systems. There is no way to change it on a per MDC system, or per personality basis.
Amateurs train until they can do it right. Professionals train until they cannot do it wrong.