Cdm1250 No Power
Moderator: Queue Moderator
Cdm1250 No Power
Anyone ever have a cdm1250 low band that wouldn't power up ? I heard sometimes that this can happen and is caused by a bad eeprom
Re: Cdm1250 No Power
There may be an issue with an internal fuse on the board behind the control head ribbon cable connector. I had a CDM1550 that would not power up and originally I thought I bricked it somehow.
Below is a link to the posts I made on this
http://batboard.batlabs.com/viewtopic.p ... 01#p327546
This may or may not be the issue but I replaced the fuse f0401 which did the trick for me and the radio still works fine. Some just put a jumper across the pads as well which of course will work the same.
Below is a link to the posts I made on this
http://batboard.batlabs.com/viewtopic.p ... 01#p327546
This may or may not be the issue but I replaced the fuse f0401 which did the trick for me and the radio still works fine. Some just put a jumper across the pads as well which of course will work the same.
-
HLA
- Posts: 2334
- Joined: Mon Jul 11, 2005 8:15 pm
- What radios do you own?: HT1550's, X9000's, CDM1550's
Re: Cdm1250 No Power
ignition sense?
HLA
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS