XTS5K Can't Enable Direct Frequency Box

[rc50won]

This one has me stumped.

I have a couple of frequencies that in Talk Around require a different PL than the repeater PL. The Talk Around PL is fixed to the receive PL. So I determine that the Direct Frequency box, under Conventional Configuration, must be checked to solve this. Problem: it is grayed out and not accessible.

Using CPS R10.01.00. Radio is R10.00.01. Flashcode 560008-001306-4.

Anyone have any ideas how to restore the Direct Frequency box?

Thanks!

Marshall

[akardam]

This one has me stumped.

I have a couple of frequencies that in Talk Around require a different PL than the repeater PL. The Talk Around PL is fixed to the receive PL. So I determine that the Direct Frequency box, under Conventional Configuration, must be checked to solve this. Problem: it is grayed out and not accessible.

Using CPS R10.01.00. Radio is R10.00.01. Flashcode 560008-001306-4.

Anyone have any ideas how to restore the Direct Frequency box?

Thanks!

Marshall

Q806 ASTRO Digital Operation
H14 Enhanced Digital ID Display
Q52 Federal Government FPP
H869 Hardware Multikey Encryption
H38 SMARTZONE Systems Operation
Q947 APCO Packet Data Interface
Q53 FCC FPP And Radio Cloning
Q387 Conventional Voting Scan
Q446 Channel Announcement
Q667 ADP Encryption Software DSP Based Only

Radios with FPP enabled in the flashcode force this field off and disabled, because the FPP function does not allow for seperate editing of the T/A parameters. Your only real option at this point is to create an additiona channel with the seperate T/A parameters.

[rc50won]

Okay, that's easily fixed. Thanks for the quick answer. I really appreciate it.

Marshall



Radios with FPP enabled in the flashcode force this field off and disabled, because the FPP function does not allow for seperate editing of the T/A parameters. Your only real option at this point is to create an additiona channel with the seperate T/A parameters.[/quote]