MTR2000 Alarms

This forum is for discussions regarding System Infrastructure and Related Equipment. This includes but is not limited to repeaters, base stations, consoles, voters, Voice over IP, system design and implementation, and other related topics.

Moderator: Queue Moderator

Post Reply
Bootman
Posts: 11
Joined: Sun Feb 24, 2002 4:00 pm

MTR2000 Alarms

Post by Bootman »

I am looking for an alarm contact on the MTR2000. It would be for any alarms that the repeater encountered (whatever makes the red alarm LED blink) I can find lots of individual alarms but no general contact. It can be open collector or relay contacts. I also have the wildcard installed if that is any help. Thanks for your time
Richard
Top
RKG
Posts: 2629
Joined: Mon Dec 10, 2001 4:00 pm

Re: MTR2000 Alarms

Post by RKG »

From memory, you need the wireline board, an interface plug (96-pin Euro), and some wildcard programming.

There are (again from memory) four alarms, and I don't recall if you can program specific alarms to an output or just the state of being in alarm.
Top
Post Reply

Return to “Base Stations, Repeaters, General Infrastructure”