Can anyone clue me on as to the default softpot values for a low band CDM1550 tuning? I recently used that "labtool" software to recover an EEPROM Error and the softpots are now all out of whack. I realize it will never be perfect without a proper alignment but I need some general settings to get it working until that can happen.
Thanks!
CDM1550 default softpot values for tuning
Moderator: Queue Moderator
CDM1550 default softpot values for tuning
"I'll eat you like a plate of bacon and eggs in the morning. "
- Some loser on rr.com
eBay at it's finest:
Me: "What exactly is a 900Mhz UHF CB?"
Them: "A very nice CB at 900Mhz speed!"
- Some loser on rr.com
eBay at it's finest:
Me: "What exactly is a 900Mhz UHF CB?"
Them: "A very nice CB at 900Mhz speed!"
Re: CDM1550 default softpot values for tuning
good luck tuning the CDM, it's a royal $*@(!
edit: also the softpots don't mean much, you have to take several voltage readings just to get started
edit: also the softpots don't mean much, you have to take several voltage readings just to get started
Re: CDM1550 default softpot values for tuning
Craptastic. Is there something I can set the sliders for that will get it by until proper tuning can take place.
"I'll eat you like a plate of bacon and eggs in the morning. "
- Some loser on rr.com
eBay at it's finest:
Me: "What exactly is a 900Mhz UHF CB?"
Them: "A very nice CB at 900Mhz speed!"
- Some loser on rr.com
eBay at it's finest:
Me: "What exactly is a 900Mhz UHF CB?"
Them: "A very nice CB at 900Mhz speed!"