Adapter for Motorola HT-1000 MTS-2000 MTX-838

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
Cornel
Posts: 35
Joined: Tue Sep 04, 2001 4:00 pm
What radios do you own?: MT2100, MTX838, P200, GP300,M1

Adapter for Motorola HT-1000 MTS-2000 MTX-838

Post by Cornel »

Hi all, I have got one of thouse "Adapter for Motorola HT-1000 MTS-2000 MTX-838 " and I was wondering if there is any pinout available for them, mine has a funny Jack connector that has a tread and I am not sure if it will take a 3 or 4 pins Jack and which way the mic and spk are wired in. Any help will be apreciated.
Top
Will
Posts: 6823
Joined: Tue Sep 04, 2001 4:00 pm

Re: Adapter for Motorola HT-1000 MTS-2000 MTX-838

Post by Will »

I takes the 3.5 mm THREADED plug which has three connections. Mic, spkr and ground. The same pinout is used in the Visar, AKA Casino radios.
There are numerous accys that have the 3.5 mm threaded plug.
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”