Radius M100 no audio...

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
User avatar
Carl
Posts: 235
Joined: Tue Sep 11, 2001 4:00 pm

Post by Carl »

i got a radiuf uhf 2ch and he has fall in the stairs, then, the audio is very very low, all others funtion works but sound is cut... what can i do ? i open it and no wire are break and the speaker don't seems broken
Top
Alan
Posts: 408
Joined: Wed Sep 05, 2001 4:00 pm

Post by Alan »

U take radiuf 2 servif shop.
They fix good.
Top
Will
Posts: 6823
Joined: Tue Sep 04, 2001 4:00 pm

Post by Will »

Radius M100 radios have a problem with the volume control "pot" failing due to "mechanical stress" like falling on the volume knob. You have to replace the volume/switch/mic jack board. The replacement volume control pot/switch has a different lead spacing and will not fit the older circuit boards. You could drill a couple of new holes like I do to replace the pot.
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”