Motorola Comtegra Help

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
Rayjk110
Banned
Posts: 1183
Joined: Thu Jan 06, 2005 4:10 pm

Motorola Comtegra Help

Post by Rayjk110 »

I have one setup and working to a radio between a TNA200 and everything is fine, except the audio deviation is a little low (even after adjusting the pot on the back of the TNA)

Does anyone know/remember the default service password on the Comtegra's built in service mode? (short of reading it with RSS, which is what I'll do next)



Thanks,
User avatar
Mikey
Posts: 410
Joined: Wed Sep 05, 2001 4:00 pm
What radios do you own?: CDM1550 LS+, HT1250, MCS2000

Re: Motorola Comtegra Help

Post by Mikey »

The Default password is 1490
Rayjk110
Banned
Posts: 1183
Joined: Thu Jan 06, 2005 4:10 pm

Re: Motorola Comtegra Help

Post by Rayjk110 »

Tried it, didn't work. Possibly the previous owner changed it for whatever reason then.


Thanks for the help, though.


Ray.
User avatar
Mikey
Posts: 410
Joined: Wed Sep 05, 2001 4:00 pm
What radios do you own?: CDM1550 LS+, HT1250, MCS2000

Re: Motorola Comtegra Help

Post by Mikey »

You will have to read it with the RSS to find out the new password then
GlennD
Posts: 482
Joined: Tue Jun 15, 2004 8:00 am

Re: Motorola Comtegra Help

Post by GlennD »

Reset to factory defaults.

Press lock and mode to go into user parameters.

Go to mic select

Change the level up or down

Press mode

Now press the reset button.
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”