System Saber III and DVP

[JohnDo]

Hi

I have a couple of System Saber3's that I would like to get working with DVP. When I install the NTN4711B DVP modules in them the radio will not power up, no display and no TX or RX.

the System Sabers are CON-6

I know the DVP modules are OK as when I install them into Saber's I can load a key and use them in secure mode.

is there a compatability issue with System Saber and DVP modules ? or am I missing something in the RSS.

also I have an unknown Secure module that I cannot Identify. its number is NTN4715B, does anyone know what it is ??

regards

John

[batdude]

wrong modules


http://batboard.batlabs.com/viewtopic.php?f=1&t=26084

[JohnDo]

do system saber's require different modules to sabers ?

[NCSHP311]

Read post 3 in the thread that Doug linked for you.

[JohnDo]

thanks

I missed the link

[NCSHP311]

No problem

[JohnDo]

so am I correct to assume the the below modules would work in a system saber on conventional chanels for use with DVP with a T3010BX KVL

o NTN5832 Smartnet DVP
o NTN5760 OTAR DVP
o NTN7288 Multikey DVP (replaced with NTN5755)


regards
John

[JohnDo]

problem solved. I sourced a NTN5832B and it works Great

thanks