Has anyone figured out a way to make the HT1250LS+ 200Mhz radios do anything other than 12.5khz channel spacing? I need to get my radio working on 221.960, but obviously the CPS won't allow me to do that. I know the radio is capable, it's just a matter of convincing the CPS to allow me to do it.
Any help from anyone who has gone through this problem would be greatly appreciated....
Thanks!
HT1250LS+ 200mhz channel spacing
Moderator: Queue Moderator
-
HLA
- Posts: 2334
- Joined: Mon Jul 11, 2005 8:15 pm
- What radios do you own?: HT1550's, X9000's, CDM1550's
Re: HT1250LS+ 200mhz channel spacing
channel spacing should be in the upper right hand corner of the frequency tab, just use the drop down box and change it to 25
HLA
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
Re: HT1250LS+ 200mhz channel spacing
200mhz radios are limited to 12.5khz spacing..... that's why I posted the question, hoping someone who knows what they are doing might know a way around this...
Jake