Programming the XTS out of band

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
sligtelyn
New User
Posts: 4
Joined: Thu Jun 05, 2008 5:31 pm

Programming the XTS out of band

Post by sligtelyn »

Hi All,

How do I modify the RSS using Hex Workshop so I may take my T-Band Motorola XTS down to 440? I already tried http://www.batlabs.com/wincps.html to no avail. I'm having problems locating the band limits.

Thanks!
User avatar
n7maq
Posts: 1440
Joined: Tue Nov 27, 2001 4:00 pm
What radios do you own?: Mocom 70 w/scan!!

Re: Programming the XTS out of band

Post by n7maq »

sligtelyn wrote:Hi All,

How do I modify the RSS using Hex Workshop so I may take my T-Band Motorola XTS down to 440? I already tried http://www.batlabs.com/wincps.html to no avail. I'm having problems locating the band limits.

Thanks!
To edit he RSS the directions are located here. http://www.batlabs.com/astrosab.html

If you have CPS then look here. http://www.akardam.net/moto/docs/cps-oob.html


Jim
sligtelyn
New User
Posts: 4
Joined: Thu Jun 05, 2008 5:31 pm

Re: Programming the XTS out of band

Post by sligtelyn »

That worked!
I had to do some tweaking because the lower limit was at 445 and there was only one occurance of that string and I had to remove the write protect on the program.

I'm running 5.02

Thanks!
Post Reply

Return to “Radio Programming”