I have never been able to find a squelch setting in the CDM1250 programming software and was wondering if I was just missing it.I am using the latest software 6.10.02.I was wondering if it was the same way as the old gm300s where you had to do it manually inside?
Using the CDM1250 as a base and it picks up alot of interf.
Any help in this matter would be great
Thanks
CDM1250
Moderator: Queue Moderator
-
firefighter13669
- New User
- Posts: 110
- Joined: Sun Jun 24, 2007 8:09 am
- What radios do you own?: M1225,F3161,F70,F5061,F33,F50V
CDM1250
KC2VHB
-
jackhackett
- Posts: 1518
- Joined: Tue Jun 10, 2003 8:52 am
Re: CDM1250
It's in the Global Tuner software
Re: CDM1250
There is a squelch softpot for various tuning points in the tuner. However, that isn't going to make interference go away. Its just going to hide it if you crank it up enough.
"I'll eat you like a plate of bacon and eggs in the morning. "
- Some loser on rr.com
eBay at it's finest:
Me: "What exactly is a 900Mhz UHF CB?"
Them: "A very nice CB at 900Mhz speed!"
- Some loser on rr.com
eBay at it's finest:
Me: "What exactly is a 900Mhz UHF CB?"
Them: "A very nice CB at 900Mhz speed!"
-
firefighter13669
- New User
- Posts: 110
- Joined: Sun Jun 24, 2007 8:09 am
- What radios do you own?: M1225,F3161,F70,F5061,F33,F50V
Re: CDM1250
Ok Thanks for the replies.
The radio just came back from the depo and they could not get any data off the old code plug so it came back blank and all the settings are off compared to before.Thanks again
The radio just came back from the depo and they could not get any data off the old code plug so it came back blank and all the settings are off compared to before.Thanks again
KC2VHB
-
firefighter13669
- New User
- Posts: 110
- Joined: Sun Jun 24, 2007 8:09 am
- What radios do you own?: M1225,F3161,F70,F5061,F33,F50V
Re: CDM1250
I have Global tuner R02.12.00 I am unsure if that will work with the new CPS 06.10 both pro series ?
KC2VHB
-
firefighter13669
- New User
- Posts: 110
- Joined: Sun Jun 24, 2007 8:09 am
- What radios do you own?: M1225,F3161,F70,F5061,F33,F50V
-
HLA
- Posts: 2334
- Joined: Mon Jul 11, 2005 8:15 pm
- What radios do you own?: HT1550's, X9000's, CDM1550's
Re: CDM1250
try it, the worst that will happen is it won't read the radio. i'm almost positive that the tuner is very forgiving with firmware versions.
HLA
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS