GM350 COR

[mm1bjp]

Hi, can somebody please advise me if the 4 channel version of the GM350 can be programmed to give a squelch output (COR) signal on the 16 pin connector on the rear of the radio.

It has been sometime since I have worked with these radio's and I suspect only the 128ch version can do it.

Can somebody please confirm.

Thanks
Allan

[Will]

It is not called "COS" in the RSS, look for receiver active, or RUS. Could also be called carrier + PL/DPL active.

[ZS6EQ]

Only the 128 channel model can do this (using software). It might be possible to tap off a signal from the squelch circuit.