Centracom DTMF
Moderator: Queue Moderator
Centracom DTMF
I have a Centracom II not a "gold" or "plus". When I purchased it (used) the only paging feature on the console was QCII. Is there a way to add DTMF to this console or is that only a feature of the "gold" and "plus" consoles? The console and CEB came with five floppy disk's but It wont let me view them. I believe it asked for a code and I have no clue what it is talking about. Help please!!!!!!!!!
Re: Centracom DTMF
CCII will support DTMF paging, but there's no "live dial", meaning you can't key a resource and just dial DTMF out on it. It has to be sent as a DTMF page.
If you're using original CCII with OMI boards, you'll need to find the UV EPROM reprogramming equipment and reprovision the OMI's for DTMF paging.
If you have CCII+ with TOMI boards, life is a bit easier, especially if you have EEPROM's on the TOMI's.
But yes, CCII/II+ supports the following formats (at least, maybe more, this is just what I remember off the top of my head):
Quick-Call I (2+2), Quick-Call II (1+1), DTMF, 5/6 Tone, SeCode/Digital Dial (2 formats), Single Tone.
If you're using original CCII with OMI boards, you'll need to find the UV EPROM reprogramming equipment and reprovision the OMI's for DTMF paging.
If you have CCII+ with TOMI boards, life is a bit easier, especially if you have EEPROM's on the TOMI's.
But yes, CCII/II+ supports the following formats (at least, maybe more, this is just what I remember off the top of my head):
Quick-Call I (2+2), Quick-Call II (1+1), DTMF, 5/6 Tone, SeCode/Digital Dial (2 formats), Single Tone.