Request for O3 XTL500 codeplug!

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
User avatar
TXCAP
Posts: 117
Joined: Thu Sep 13, 2001 4:00 pm
What radios do you own?: 5100/5300-TP9100 VHF&7/800

Request for O3 XTL500 codeplug!

Post by TXCAP »

Would anyone have a codeplug for an XTL5000 O3 HHCH don't matter what wattage I just wanna familiarize myself with it.......
Top
User avatar
alex
Administrator
Posts: 5762
Joined: Mon Sep 03, 2001 4:00 pm

Re: Request for O3 XTL500 codeplug!

Post by alex »

TXCAP wrote:Would anyone have a codeplug for an XTL5000 O3 HHCH don't matter what wattage I just wanna familiarize myself with it.......
It's honestly no different than an O5 code plug. The heads are interchangeable, the only thing you have to make sure you set is the key settings in the general radio configuration, just like you would setup the side buttons on a portable radio.

If you happen to have a W code plug, you can follow the control head change procedure in the code plug and end up with an Odyssey complaint code plug (O5/O3).

-Alex
The Radio Information Board: http://www.radioinfoboard.com
Your source for information on: Harris/Ma-Comm/EFJ/RELM/Kenwood/ICOM/Thales, equipment.
Top
User avatar
TXCAP
Posts: 117
Joined: Thu Sep 13, 2001 4:00 pm
What radios do you own?: 5100/5300-TP9100 VHF&7/800

Re: Request for O3 XTL500 codeplug!

Post by TXCAP »

Thanks Alex, I knew that. I should have asked for any vhf xtl codeplug. I'm buying one or two from Doug and all three usb cables are missing from the shop, I blew a gasket when I realized they were all missing.

Mc
Top
Post Reply

Return to “Radio Programming”