Control cable ID

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
firebug24
Posts: 426
Joined: Sun Apr 24, 2005 12:37 pm
What radios do you own?: Maxtrac/syntorX9000/HT1250

Control cable ID

Post by firebug24 »

Hello all

Im looking for info on HKN4018A cable. I found out its a cable for Mitrek radio but don't know if its a 1ch or 4ch cable ??
thanks
steve :o
Top
Will
Posts: 6823
Joined: Tue Sep 04, 2001 4:00 pm

Re: Control cable ID

Post by Will »

The four channel cable has wires with pins numbered 7, 8, 9, & 10.

The HKN4017A IS the control cable for the Maratrac Basic radio with the clamshell style control heads.
Last edited by Will on Sun Sep 21, 2008 1:33 pm, edited 1 time in total.
Top
firebug24
Posts: 426
Joined: Sun Apr 24, 2005 12:37 pm
What radios do you own?: Maxtrac/syntorX9000/HT1250

Info needed control head cable HKN4032A-1

Post by firebug24 »

Hell all

I need some info on this cable : HKN4032A-1
thanks
steve :o

P.S. will any Mitrek control head cables work on maratrac radios ?
Top
Mike B
Posts: 907
Joined: Thu Sep 20, 2001 4:00 pm

Re: Control cable ID

Post by Mike B »

HKN4032A - Cable, 18', neg. ground, up to 32 frequency, non-weatherproof (Syntor)

http://www.onfreq.com/syntorx/surplus.html#sp_cables
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”