MCS2000 Help Needed!
Moderator: Queue Moderator
-
radios4bill
- Posts: 131
- Joined: Mon Mar 25, 2002 4:00 pm
- What radios do you own?: XTL5000, APX7000, Astro Saber
MCS2000 Help Needed!
Hi Group; I picked up a MCS2000 UHF Model III 100 Watt radio and I am having trouble with PL. I can't figure out how to program the PL? When I ground the microphone on the clip it is still receiving other PL's It has a 2 prong molex on the control cable, is that for a "old school" type hang-up box? Tkanks, Bill
-
HLA
- Posts: 2334
- Joined: Mon Jul 11, 2005 8:15 pm
- What radios do you own?: HT1550's, X9000's, CDM1550's
Re: MCS2000 Help Needed!
if i'm not mistaken that hang up clip should be a magnetic one
HLA
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
Re: MCS2000 Help Needed!
NO! That two prong molex is for an external speaker!!!!
Re: MCS2000 Help Needed!
As d119 said that molex conn is for the external speaker.
When in the CPS programing software go into the "Conventional Configuration"
and click on the "General" tab and make sure "HUB Defeats PL" is unchecked
and rewrite the codeplug and it should work for you.
When in the CPS programing software go into the "Conventional Configuration"
and click on the "General" tab and make sure "HUB Defeats PL" is unchecked
and rewrite the codeplug and it should work for you.
fineshot1
NJ USA
NJ USA