Centracom Questions

[wb4bli]

1. Is there a desktop rack that i can buy to convert my large floor rack Operating Positions. This way I can set the OP on my desk to use it.

2. I took the DC transformer off of the BIM and now how do I make those work as a Tone. It doesn't seem to recieve before or after I have removed it.

3. Is there someone in the area I could send my TOMI cards to program the additional alert tones to my system. Alert 1 is all I have currently.

4. Can someone resend me the CCII Paging code program again. I had a major PC crash that caused me to loose it.

Thanks in advance.

[d119]

Centracom stuff is 19" wide so yeah, if you can find a desktop rack, there ya go.

You have to reprogram the TOMI's to indicate whether or not the BIM is tone, DC or relay keying. Simply removing the DC daughtercard won't do anything except make it not work as a DC BIM.

Can't help ya with the other ones.

[wb4bli]

Thanks for that 1 questions. Anyone else have the rest of the answers?

[Rod Farva]

Well you could buy a desktop CC2 op position and that will help get rid of the big stack of metal you no longer wish to use. If you have TOMIs you have a CC2+. There is RSS out there for the CC2 plus that will help you reconfigure your system. You will need a RS232 card to PC cable and the software..

[wb4bli]

Yes you are right. The problem is I have the software and RS232 board. Problem is my TOMI board will not allow me to write to the EPROM. I got me some compatible EEPROMs and used a friends burner to copy them. I just can't edit them. So I need a newer tomi or I need one of the original EPROM writers. If someone would just reconfigure this one thing I can live with it. Thanks