ASTRO Saber settings

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
User avatar
Astrogoth
1 Warning for RSS/CPS Wanted/For Sale/Links
Posts: 45
Joined: Sun Sep 30, 2001 4:00 pm
What radios do you own?: ASTRO Saber III

ASTRO Saber settings

Post by Astrogoth »

Howdy all,


Yet another AS question. I have the latest (final?) CPS. Wanted to change the master squelch setting. There is none. Okay. Looked in ASTRO Tuner. Not there. Tried to set the battery low alert setting. It chirps at 33% left. Settings not found either.


Ideas?
User avatar
Tom in D.C.
Posts: 3859
Joined: Tue Sep 04, 2001 4:00 pm
What radios do you own?: Progreso soup can with CRT

Re: ASTRO Saber settings

Post by Tom in D.C. »

My V5.02 AS CPS has only a squelch setting on a per-personality basis; a radio-wide
squelch setting would probably be a contradiction if it existed, which I don't think it does.
Tom in D.C.
In 1920, the U.S. Post Office Department ruled
that children may not be sent by parcel post.
User avatar
Astrogoth
1 Warning for RSS/CPS Wanted/For Sale/Links
Posts: 45
Joined: Sun Sep 30, 2001 4:00 pm
What radios do you own?: ASTRO Saber III

Re: ASTRO Saber settings

Post by Astrogoth »

The CPS says the per personality settings are a "fine tuning". They won't let you set the real squelch threshold, just add more. That may be seen as a good thing. That means it's likely no previous Ham has messed with the setting.
Now that I think about it this may be a "feature" not a problem.
Hightower
Posts: 976
Joined: Mon Sep 24, 2001 4:00 pm

Re: ASTRO Saber settings

Post by Hightower »

Tom is right, there is no master squelch settings, only a per personality basis.

I'd rather have the squelch settings like they are, rather than just a master squelch setting. Allows for much more flexability.
User avatar
Astrogoth
1 Warning for RSS/CPS Wanted/For Sale/Links
Posts: 45
Joined: Sun Sep 30, 2001 4:00 pm
What radios do you own?: ASTRO Saber III

Re: ASTRO Saber settings

Post by Astrogoth »

Ahh, but there is a master setting. Somewhere. On some frequencies setting the per channel squelch to zero doesn't open the master squelch. Granted on most freq's it does but not all. I'm starting to suspect the master setting is a physical pot on the RF board not a software setting.
akardam
Posts: 2251
Joined: Thu Mar 04, 2004 10:53 am

Re: ASTRO Saber settings

Post by akardam »

When is the last time this radio was run through a full alignment?
User avatar
Astrogoth
1 Warning for RSS/CPS Wanted/For Sale/Links
Posts: 45
Joined: Sun Sep 30, 2001 4:00 pm
What radios do you own?: ASTRO Saber III

Re: ASTRO Saber settings

Post by Astrogoth »

akardam wrote:When is the last time this radio was run through a full alignment?

Recently. It works well, I just wanted to tweak it a bit.

No LCD contrast adjustment either. Could use that as well.
User avatar
d119
Posts: 3538
Joined: Tue Mar 19, 2002 4:00 pm

Re: ASTRO Saber settings

Post by d119 »

How exactly was said alignment performed?
User avatar
Astrogoth
1 Warning for RSS/CPS Wanted/For Sale/Links
Posts: 45
Joined: Sun Sep 30, 2001 4:00 pm
What radios do you own?: ASTRO Saber III

Re: ASTRO Saber settings

Post by Astrogoth »

No way of knowing but I trust the tech. I'm sure he did it right.
Post Reply

Return to “Radio Programming”