CDM1250 ignition power on

This forum is dedicated to helping people with questions about installing radio equipment in vehicles. This can include antenna installs, electrical wiring questions/problems, and mounting systems. Pictures of installs are welcome.

Note: Discussions regarding lighting, sirens, and other equipment now has its own forum in the 'off-topic' section below.

Moderator: Queue Moderator

Post Reply
jimmyema
New User
Posts: 6
Joined: Sun Jul 20, 2008 7:58 pm
What radios do you own?: HT1250, CDM1250 with remote

CDM1250 ignition power on

Post by jimmyema »

I want to have the CDM1250 power on when the car starts up, its a 03 Jeep Liberty... Where would it be the easiest to tap into for that?
Top
thebigphish
Posts: 1477
Joined: Sat Nov 29, 2003 10:10 pm
What radios do you own?: AM/FM

Re: CDM1250 ignition power on

Post by thebigphish »

back of the AM/FM radio, or the fusebox.
"How do you plan to outwit Death?"
"With a knight and bishop combination; I will destroy his flank." --Antonious Block
Top
vx7ruser
New User
Posts: 3
Joined: Sun Oct 19, 2008 8:36 pm

Re: CDM1250 ignition power on

Post by vx7ruser »

Agreed..Hook the ignition sense cable to the Am/FM Radio circut or one with a similar Ignition on power configuratuion. That is how I have mine
Top
Post Reply

Return to “Vehicle Radio Installs”