Need some advice
Moderator: Queue Moderator
Need some advice
I am in need of a mobile UHF radio for use with the fire Dept. I am somewhat familliar with the older style spectras and the like. I have limited room in my vehicle for mounting radios so I am thinking along the lines of an M1225. I have searched ebay and found several but none of them say wether they are going to be usefull after the changeover. I am looking for something with an alphanumeric display and at least 20 channels, any suggestions???
Re: Need some advice
Is this the change over to STARnet system?medic62 wrote:I am in need of a mobile UHF radio for use with the fire Dept. I am somewhat familliar with the older style spectras and the like. I have limited room in my vehicle for mounting radios so I am thinking along the lines of an M1225. I have searched ebay and found several but none of them say wether they are going to be usefull after the changeover. I am looking for something with an alphanumeric display and at least 20 channels, any suggestions???
If it is, you're not going to find anything you can program up for it without buying directly through your department - it's a MaCOM OpenSky system...
Or are you referring to narrowbanding on your existing conventional UHF frequencies?
Or possibly a migration to P25 digital?
Re: Need some advice
Well the M1225 is just that - a wideband AND narrowband capable radio, hence the 12 & 25 in the model number.
If you go with an M1225, you can set it up as wideband now, and when you're mandated to go narrow you just reprogram the radio.
Same deal with the P1225 portable, and pretty much everything else that Motorola has released since the 1225 series.
If you go with an M1225, you can set it up as wideband now, and when you're mandated to go narrow you just reprogram the radio.
Same deal with the P1225 portable, and pretty much everything else that Motorola has released since the 1225 series.
Re: Need some advice
thanks D119 thats the info I was looking for sorry I wasnt clear. Also where can I mount it in a 2002 dodge dakota with the 60/40 bench
Re: Need some advice
Well, the answer to that is probably where ever it fits and where ever you think it's best mounted.
Re: Need some advice
is there a consolel available for my vehicle or am i limited because of the bench seat
Re: Need some advice
I had the factory console down the middle. It may be possible to remove your center armrest section or even get a "40" driver seat from a junk yard and do this:
http://batboard.batlabs.com/viewtopic.p ... lit=dakota
Jason
http://batboard.batlabs.com/viewtopic.p ... lit=dakota
Jason