HT750 Scan Priority

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
Jesse28601
New User
Posts: 5
Joined: Tue Dec 09, 2008 5:43 pm

HT750 Scan Priority

Post by Jesse28601 »

Does anyone know if there is a way to program an HT750 to have the selected channel as priority, no matter what channel you have it on? Right now, and I believe this is normal, the first channel in scan list is always the priority channel. Thanks in advance.
Top
doughboy5100
Posts: 23
Joined: Thu May 05, 2005 12:33 pm

Re: HT750 Scan Priority

Post by doughboy5100 »

Under scan list members make selected the first member, and on the general tab select priority1 1st scan list member.
Top
Jesse28601
New User
Posts: 5
Joined: Tue Dec 09, 2008 5:43 pm

Re: HT750 Scan Priority

Post by Jesse28601 »

Thanks. That worked. I had actually thought about doing that, but I figured it was more trouble than it was worth, and I wasn't sure if that would work or not. Thanks again
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”