I have a UHF MTS2000 that I would like to use on 800Mhz. Could I just change out the RF board or would I need to have a different controller as well?
Thanks.
MTS2000 RF Board
Moderator: Queue Moderator
-
W3MOT
- Banned for the Greater Good
- Posts: 450
- Joined: Fri Aug 25, 2006 6:30 pm
- What radios do you own?: Just a console for nuke'n.
MTS2000 RF Board
Intellegence/\/\Somewhere
"One radio at a time..."
"One radio at a time..."
Re: MTS2000 RF Board
More than likely, you would need a controller swap as well.
The band in question makes use of different controller functions unavailable in models with limited, or closed architecture, such as memory allocation, signalling, and ISW/OSW operation and others.
The full/detailed service manual lists every model of both the XCVR and controller associated with them, including their respective numberings.
Try to locate one of these manuals, and you should be set.
The band in question makes use of different controller functions unavailable in models with limited, or closed architecture, such as memory allocation, signalling, and ISW/OSW operation and others.
The full/detailed service manual lists every model of both the XCVR and controller associated with them, including their respective numberings.
Try to locate one of these manuals, and you should be set.
-
W3MOT
- Banned for the Greater Good
- Posts: 450
- Joined: Fri Aug 25, 2006 6:30 pm
- What radios do you own?: Just a console for nuke'n.
Re: MTS2000 RF Board
Thanks for the response! I appreciate your help.
Intellegence/\/\Somewhere
"One radio at a time..."
"One radio at a time..."