iDen M370/Lm2000

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
zues2054
New User
Posts: 10
Joined: Fri Aug 17, 2007 7:11 am

iDen M370/Lm2000

Post by zues2054 »

We've set-up a Motorola M370 at our dispatch, but I've got a glitch. Every night the radio powers down by itself. Has anyone experienced this, is this a software setting or is the iDen system (Nextel) causing this?
User avatar
n7maq
Posts: 1440
Joined: Tue Nov 27, 2001 4:00 pm
What radios do you own?: Mocom 70 w/scan!!

Re: iDen M370/Lm2000

Post by n7maq »

zues2054 wrote:We've set-up a Motorola M370 at our dispatch, but I've got a glitch. Every night the radio powers down by itself. Has anyone experienced this, is this a software setting or is the iDen system (Nextel) causing this?
It's a setting and it needs to be changed in RSS. Under the timer window, set auto power down to 0. The default is 480 min (8 hr).

Jim
KE9GK
Posts: 234
Joined: Sat Aug 03, 2002 6:27 am

Re: iDen M370/Lm2000

Post by KE9GK »

Have you had any luck tone remoting one of these units?

I have been tasked with the project for a towing company...it doesn't need to be talkgroup steerable...just need to be able to remotely key it through the desksets. If so....anyone have the pinouts...or a cable thats meant to connect to a termination panel?
After years of dealing with the public I have realized.....You Just Can't Fix Stupid!
User avatar
n7maq
Posts: 1440
Joined: Tue Nov 27, 2001 4:00 pm
What radios do you own?: Mocom 70 w/scan!!

Re: iDen M370/Lm2000

Post by n7maq »

KE9GK wrote:Have you had any luck tone remoting one of these units?

I have been tasked with the project for a towing company...it doesn't need to be talkgroup steerable...just need to be able to remotely key it through the desksets. If so....anyone have the pinouts...or a cable thats meant to connect to a termination panel?

We have hooked up the M470's to consols, I don't know if the 370's will work with the remotes that are out there. I'll check with the tech who did the last one for his notes.


Ji\m.
Post Reply

Return to “Radio Programming”