GTX/ LTR Portable Error 06 code????

[N4RPD]

Have a GTX LTR portable that after the self test, the radio is getting an "error 06" on the LCD and then a continues loud error tone. The error started after loading the modified C/P back into the radio. I did not save the original C/P, my mistake, but don't know what the "error 06" means?

Does anyone know what this error code means?

Thanks.

[wavetar]

Error 06 means corrupted codeplug. It can also mean the radio doesn't recognize the codeplug...such as if you try to put a SmartZone capable LTS2000 codeplug into a GTX...you'll be able to read & write to the radio afterwards, but it'll always show the Error 06 on the display and not work. You'd need to blank the radio with LAB, then re-initialize in order to get a 'default' codeplug back into the radio.

Todd

[N4RPD]

You'd need to blank the radio with LAB, then re-initialize in order to get a 'default' codeplug back into the radio.
Todd

I blanked the radio with GTXLAB, the RSS is now saying it cannot load CP into radio because I must initialize the board. I cannot find an option to initialize in either GTXLAb or GTX RSS. Any ideas?

[wavetar]

Use the regular GTX RSS and go into the service alignement menu. The RSS will recognize it as a blank board & let you into the initialization procedure.