I have programmed two UHF SM50's to the same simplex frequencies and they communicate to each other no problem. My problem is when I program in TPL codes they still talk to each other but the squelch opens up on both to a hand held, same freq, with no TPL code. So I tried programming one sm50 with a TPL code and the other none. The SM with the TPL code still opens up, when receiving to the other radio with no TPL code. Am i missing something in the programming stage? I thought the TPL code would block open frequencies form opening the squelch. Any ideas?
Thankyou
Sm50 TPL Problem
Moderator: Queue Moderator
-
Tom in D.C.
- Posts: 3859
- Joined: Tue Sep 04, 2001 4:00 pm
- What radios do you own?: Progreso soup can with CRT
Re: Sm50 TPL Problem
It sounds as if your radios are set for TPL transmit only with the receivers operating in CSQ at all times.
Tom in D.C.
In 1920, the U.S. Post Office Department ruled
that children may not be sent by parcel post.
In 1920, the U.S. Post Office Department ruled
that children may not be sent by parcel post.
Re: Sm50 TPL Problem
Is that a programming issue or hardware?
Thanks
Thanks