I have several CDM-750 UHF radios that I want to use at unattended locations. Does any one know how to make the radio come back after a power loss without having to push the power button? Thanks in advance.
Brad
KI4BWJ
CDM-750
Moderator: Queue Moderator
Re: CDM-750
Ignition sense works good, pin 10 wired to your power source, with an inline 4 amp fuse. You'll also need to set up ignition sense in the CPS
-
Mikey
- Posts: 410
- Joined: Wed Sep 05, 2001 4:00 pm
- What radios do you own?: CDM1550 LS+, HT1250, MCS2000
Re: CDM-750
Just Like Escomm Said, pin 10 is what you use when you use the CDM in a repeater setup and you want the radio to power back up by itself when the power gets cycled.
Re: CDM-750
The only thing you have to do is put in a jumper on pins 7&9. In the Accessory Configuration tab of the CPS set to Ignition sense type to ON/OFF & IGNITION.
SD70MAC out
My collection;
XTS5000 VHF FPP,XTS3000 VHF M1&M3,XTVA,XTS2500 UHF Q FPP,Astro Spectra"s W3 VHF,W9 VHF,W7 800,HT1250 35-50,XPR4500 Q,2 CDM1550LS+ VHF 160ch,CDM1550 X 160ch VHF 25w,MAXTRAC 42-50 32ch,CDM1250 42-54
My collection;
XTS5000 VHF FPP,XTS3000 VHF M1&M3,XTVA,XTS2500 UHF Q FPP,Astro Spectra"s W3 VHF,W9 VHF,W7 800,HT1250 35-50,XPR4500 Q,2 CDM1550LS+ VHF 160ch,CDM1550 X 160ch VHF 25w,MAXTRAC 42-50 32ch,CDM1250 42-54