OK I just recently got some GM300's however when I read them with the RSS it is showing Error Code 58, codeplug error.
The radios in question Are:
GM300 VHF 40 Watt 20 ch 16 pin accy
Model # M43GMC29C2AA
GM300 UHF 25 Watt 9 ch? 16 pin accy
Uknown Model #
Is there anyone who can help me out here like in means of having a codeplug for these radios? I dont know what to do right now with them. Thanks
CHRIS
Need some help with GM300 problems
Moderator: Queue Moderator
Hi:
Sounds like you may have a " Corrupted" Logic
Board, as the GM300's never really had 20 Ch.
Factory Stock they are 16.
It could also mean your RSS is too old, but
I suspect the corrupted logic board in your
case since Error 58 means radio not supported.
If you have some Maxtrac RSS, you might check
and see if someone changed the configuration
from a GM series to a Radius / Maxtrac
Anyhow, restoring the code plug is not very
simple with respects to the GM series. I can
manytimes restore them, but it would be set
to the Factory Default settings.
Email me if you are interested.
Monty
Sounds like you may have a " Corrupted" Logic
Board, as the GM300's never really had 20 Ch.
Factory Stock they are 16.
It could also mean your RSS is too old, but
I suspect the corrupted logic board in your
case since Error 58 means radio not supported.
If you have some Maxtrac RSS, you might check
and see if someone changed the configuration
from a GM series to a Radius / Maxtrac
Anyhow, restoring the code plug is not very
simple with respects to the GM series. I can
manytimes restore them, but it would be set
to the Factory Default settings.
Email me if you are interested.
Monty