VHF MSF5000 VCO

This forum is for discussions regarding System Infrastructure and Related Equipment. This includes but is not limited to repeaters, base stations, consoles, voters, Voice over IP, system design and implementation, and other related topics.

Moderator: Queue Moderator

Post Reply
angel953
Posts: 35
Joined: Mon Feb 21, 2005 7:27 am

VHF MSF5000 VCO

Post by angel953 »

Can anyone explain why you can not adjust the vco output as you do in the uhf units. what is the normal reading of the vco position 5 on the ua meter in the VHF unit. thanks Luis
Love to bring back old radios
Top
User avatar
Doug
Batboard $upporter
Posts: 445
Joined: Thu Sep 06, 2001 4:00 pm

Re: VHF MSF5000 VCO

Post by Doug »

Put your test set in meter 5 position with the reversing switch set to positive. Both VCO's should be at 38 ua. plus or minus 2 ua.
Quoted from the manual "VHF stations do not require fine tuning for proper operation"
Doug
May the Schwarz be with you.
Top
Post Reply

Return to “Base Stations, Repeaters, General Infrastructure”