I cant programm the Repeater Access Button

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
AstroSaber3
New User
Posts: 11
Joined: Tue Sep 29, 2009 8:56 am

I cant programm the Repeater Access Button

Post by AstroSaber3 »

Hello

Since 2 weeks I have buy a Motorola ASTRO Saber III VHF. (255 Channel)

Flashcode: 900001-000000-0 ( on the backside of the Radio )
Flashcode: 100001-000000-7 ( CPS )
System Pkg: H35
Manufactured: 4/ 3/ 98


FCC ID: AZ489FT3770
Handie-Talkie FM Radio
Model No: H04KDH9PW7AN
Factory ID: ASTRO
Serial No: 465AUN0123


For programming I take the ASTRO Saber and XTS3000 CPS. version R05.03.00


My problem that I have is that I cant programm the Repeater Access Button 1 (Side Button 1 with 1750 Hz.) &. the RAB Button 2 (Side Button 2 with 2135 Hz.)
What is the problem and what can I do to use the sidetone???
I dont know any more! Can anyone help me please?
User avatar
kotaguchi
Posts: 1373
Joined: Mon Mar 02, 2009 10:04 pm
What radios do you own?: XTS5000

Re: I cant programm the Repeater Access Button

Post by kotaguchi »

Won't work because your radio flash code does not have G101 Repeater Access option.

Without that option,you don't have repeater access.

Regards,

Ko
In Memory of those that serve.

Seal Team Six

Radios I currently own:

2-qty APX7000 UHF R2/700-800MHz M3
AstroSaber3
New User
Posts: 11
Joined: Tue Sep 29, 2009 8:56 am

Re: I cant programm the Repeater Access Button

Post by AstroSaber3 »

OK Thanks

But from who can i get there?
And what i need to programm this on the Radio ( normal RIB Box)?

Sincerely
yours
AstroSaber3
jwb8734
Posts: 290
Joined: Thu Apr 17, 2003 8:01 pm
What radios do you own?: To many Motorola and Vertex

Re: I cant programm the Repeater Access Button

Post by jwb8734 »

A flash upgrade is normally done by a Motorola Dealer or by DEPOT.
AstroSaber3
New User
Posts: 11
Joined: Tue Sep 29, 2009 8:56 am

Re: I cant programm the Repeater Access Button

Post by AstroSaber3 »

Hello

Who cane tell me Dealers and or Depot who cane make the Flashcode upgrade only in one day?
We need the radios urgently, Then we came for the upgrade in the States.

Sincerelly yours
AstroSaber3
User avatar
kotaguchi
Posts: 1373
Joined: Mon Mar 02, 2009 10:04 pm
What radios do you own?: XTS5000

Re: I cant programm the Repeater Access Button

Post by kotaguchi »

To get a legit flash upgrade,you will have to go to a authorized Motorola dealer that can order the flash upgrade for you.I think it will come on a USB flash upgrade memory card?They will then have to use a smart rib box and flash your radio with it.The dealer will have to know your exact model no and serial no to give to Motorola to obtain the flash upgrade.I dont know what they cost but I would guess about $75.00 and up and not including labor for them to flash your radio for you.

But,you can always try to find someone to "flash whore"your radio.

Regards,

Ko
In Memory of those that serve.

Seal Team Six

Radios I currently own:

2-qty APX7000 UHF R2/700-800MHz M3
AstroSaber3
New User
Posts: 11
Joined: Tue Sep 29, 2009 8:56 am

Re: I cant programm the Repeater Access Button

Post by AstroSaber3 »

Hy

Can anyone help my, to find somone or a store to make a software (Flashcode) upgrade for the Astro Saber 3.
In Austria and Europe are nobody how can make this. Also Motorola Berlin can´t do this.

sincerely Astro Saber 3
Post Reply

Return to “Radio Programming”