Rogger Beep

[elmanoduarte]

Hi
There s any way to put a ROGGER BEEP in my GM-300, i m using it for Repeater, it will be good if it Beeps when TX goes down!
Someone got any idea ?

Thanks

[linkinpark9812]

Hi
There s any way to put a ROGGER BEEP in my GM-300, i m using it for Repeater, it will be good if it Beeps when TX goes down!
Someone got any idea ?

Thanks

MDC 1200? You could set it to EOT (Post) so it would make a noise. However, it is kind of annoying when not muted and it may be annoying to others.

Is this an amateur repeater? I know most already do the beep for you when you drop TX.

I know the HT1000 can do this, but it may be possible to have a DTMF tone (or two) to go off at the end of a transmission. Will sound better on the ears.

Thats about all I can think of. I don't have much knowledge on the GM-300, so maybe there is possibly a roger beep option?

From the two motorolas I own (Spectra and HT1000), there is no dedicated roger beep that I have ever seen in the RSS.

[MSS-Dave]

Perhaps the repeater has a controller that will do a courtesy tone? Check with whoever runs/owns it.

If you just want to make "noise" when you unkey just do MDC on a post PTT but this will sure to piss off others after awhile.

You could also try saying "Over" or "Kick it Back" or "C'mon".......

Dave

[elmanoduarte]

Hi
Thanks for answer

Mabe i can install this kit.. http://images.google.pt/imgres?imgurl=h ... N%26um%3D1
..its a Roger Beep Kit to install in CB radios, mabe it work, what you think?
..No its not in Amateur Band.

thanks

[Tom in D.C.]

The reason that kit is in a CB ad is because that's where roger beeps belong, in the CB band. The fastest
way to have you friends come looking for you with less than good intentions is to start putting funny noises
before or after your radio transmissions. You may be actually thinking of the "invitation to transmit" beep that is used
on trunked systems for a definite purpose, which is to tell you that your radio is connected to the system and
the system will take your message and is not what you call a roger beep. Unless everyone on your system/channel/
repeater/whatever is doing/using the same thing you'd probably be very unwise to do something like this on your own.

[elmanoduarte]

Ok
Thanks for your time.
Well the repeater is my, and the reason me and my brother wants that its easy for we know if we geting from some where to the reapeater.
About do MDC ,,,does my radio got that ?,,isnt that some kind of extra kit or moduke?!
My Motorolas are Radius GM-300 16 CHannels VHF.
Please explain what is or about MDC !!

Thanks

[Bill_G]

Look in your signalling setup to see if you have any transmit signalling in your radio. Then see if it has any options like pre or post ptt ani. Doesn't matter if it's mdc, dtmf, or two tone. If your radios have signalling, turn one on a see what it does.

[spectragod]

You could, and probably should, just buy a pair a CB's.

[wazzzzzzzzup]

i personally like the idea of using a post MDC data burst, it makes me stand out, and it gets the occasional conversation going on the local ham repeaters about the benefits of MDC ID, and it always gives me an opportunity to share with people the quality and features of motorola gear. yes i have the same repeaters in a different zone without MDC so im not doing MDC 24/7 but when i get a hankerin' for some DATA TX i do.

i would really like to get some MDC600 goin' or MODAT! the locals have never heard the turkey call, and if i had it, they would be introduced

i feel ham radio is about the experimentation of radio technology, commercial equipment included.

[n7maq]

Here is a low cost repeater controller that will give you a "courtesy tone" tone.

http://www.nhrc.net/nhrc-micro/


Jim

[d119]

im not doing MDC 24/7 but when i get a hankerin' for some DATA TX i do.

Please expect my cleaning bill soon for that one.

Ladies and Gentlemen, I've found my signature line. Thank you!

[com501]

Usually, when I forget the MDC on my radio and key up on a ham repeater, some lid decodes it and calls my radio back, invoking an annoying ringing sound from the console.....

Then I remember.

Good thing 'stun' is not enabled on my radio. (Right Peter?)

[MSS-Dave]

[elmanoduarte]

Ok, i think i solved the problem, i buy a small roger beep kit in ebay, what is normaly monted in CB´s , think it will work in this.

[elmanoduarte]

Greatings to all

I alredy recived the roger beep kit.
Now i need some help to conect it.
This is the conections from the KIT:

http://yfrog.com/5gwiresej

i think it will be possible to conect to the Duplex repeater Interface ...( http://cgi.ebay.com/Duplex-Repeater-Int ... 51903b42bc )

,,in the back pins.

Can anyone help ?

thanks