I have two ribs one from barnwell and one from radiostew. I am having problems with the motorola software in particular 1225 recognizing it attached to the com port or seeing it is there some special way my com port hast to be set or?????
Please Help
Tare kennedy
Rib Problems I Know its probably above my Head
Moderator: Queue Moderator
-
tarekennedy
- Posts: 1
- Joined: Thu Nov 15, 2001 4:00 pm
-
PCSAR4x4652
- Posts: 25
- Joined: Sat Dec 01, 2001 4:00 pm
- What radios do you own?: MTS2000, Spectra & VRS/PA
are you using "M" cables or homemade cables?
i had the same problem untill i did a continuity check on each pin on the pc to rib cable and found that 2 wires were crossed. after swapping the 2 it worked fine.
also, if the battery is dying or the radio and rib are not "on" you may get that error, too.
_________________
Todd Freeman
Pierce Co Sheriff Dept. SAR
<font size=-1>[ This Message was edited by: PCSAR4x4652 on 2001-12-02 22:35 ]</font>
i had the same problem untill i did a continuity check on each pin on the pc to rib cable and found that 2 wires were crossed. after swapping the 2 it worked fine.
also, if the battery is dying or the radio and rib are not "on" you may get that error, too.
_________________
Todd Freeman
Pierce Co Sheriff Dept. SAR
<font size=-1>[ This Message was edited by: PCSAR4x4652 on 2001-12-02 22:35 ]</font>