Region and Flash Upgrades

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
ZS6JPL
Posts: 5
Joined: Tue Jan 16, 2007 12:47 am

Region and Flash Upgrades

Post by ZS6JPL »

I have plenty CM300 radio's that found their way to me. They are from the America's region and when I want to read or write them I get a region error code. Would re-flashing them with the Flash Tool change the region code in order for me to program them with my EMEA region RSS.

Look forward to some good replies.

Johan ZS6JPL
Johan Lehmann ZS6JPL
Tel: +27 12 8413648
Member of SARL, ARRL
Top
Andreas
Posts: 626
Joined: Sun Sep 09, 2001 4:00 pm
What radios do you own?: radios

Re: Region and Flash Upgrades

Post by Andreas »

You can change the regionalcode with the codeplug tool from the US Waris Lab Flashkit or use the upgradetool from the EU Waris Lab Flashkit.If you only have an old EU Waris firmware,you can modify it,so it let you change the regional code.Search for the first 01E1 value in the exe file and then look for the first 0F84 value above 01E1.Change the 0F84 into 0F85.

Andreas
Top
Post Reply

Return to “Radio Programming”