I am having some trouble configuring a voting scan list for my XTS3k. I have created a Scan List and set it to Voting Scan and included the three channels that need to be voted. On the personalities that correspond to those channels I set the scan list selection to the proper voting scan list and turned on automatic scan. The RSSI threshold is at 57 (default).
The problem is that with all these settings applied, voting scan does not work. I turn the radio on and put it on the channels that are in the voting scan list and the radio does not scan them. It will receive traffic on the channel that is selected, but does not vote across the three. The scan icon does not appear and when the monitor button is pressed a buzzing sound (similar to the sound of a digital transmission) is heard. I have programmed Voting Scan into an Astro Saber using the same method with no problems, so I am really at a loss here.
I have tried just about everything I can think of to get this to work, and have had no success. Any ideas?
Radio Info:
FW: R07.11.00
DSP: N08.02.06
Flash: 599108-1C5E00-1
CPS is R05.03.00
Programming screens below:
Scan List Configuration:
Scan List:
Scan Configuration:
Conventional Personality Scan Tab:
