While programing my XTS 3000 it went into 01/82 Any words of wisdom?
David
HELP XTS 3000 VHF radio
Moderator: Queue Moderator
-
Tom in D.C.
- Posts: 3859
- Joined: Tue Sep 04, 2001 4:00 pm
- What radios do you own?: Progreso soup can with CRT
Re: HELP XTS 3000 VHF radio
I could tell you what it means if I was at home but I'm not. First do a search of this Board for the code; it should show up pretty readily as we get lots of inquiries such as this. Next, go to
RepeaterBuilder.com and see what shows up there. Last, somebody will probably chime in here to tell you what it means.
As I think about it, 1/82 might be the normal indication while programming. I say it might be.
RepeaterBuilder.com and see what shows up there. Last, somebody will probably chime in here to tell you what it means.
As I think about it, 1/82 might be the normal indication while programming. I say it might be.
Tom in D.C.
In 1920, the U.S. Post Office Department ruled
that children may not be sent by parcel post.
In 1920, the U.S. Post Office Department ruled
that children may not be sent by parcel post.
Re: HELP XTS 3000 VHF radio
Did that and it says its a corrupted code plug. I have a backup CP which I tried to write back into the radio. A message tells me that dispatch has inhibited the radio. I checked the CP and the kill was not turned on plus there is not any systems that would have this feature near my location.
I also get a message Ptr field 3602 reference block with absolute id 129 but block at address has type value which resolves to absolute id 0 unpack failed
I also get a message Ptr field 3602 reference block with absolute id 129 but block at address has type value which resolves to absolute id 0 unpack failed