Quantro Power Output Problem on Repeater
Moderator: Queue Moderator
Quantro Power Output Problem on Repeater
UHF 225 Watt Quantro has power output problem at rated power.Cannot get more that 200 Watts Output in power output calibration without getting Error 4124 HC11 Driver_overdrive_alarm.FPA and IPA Currents on metering is correct and balanced.What Stage is this error message indicating a problem with?
-
N4DES
- was KS4VT
- Posts: 1234
- Joined: Thu Dec 25, 2003 7:59 am
- What radios do you own?: APX,XTS2500,XTL2500,XTL1500
Re: Quantro Power Output Problem on Repeater
Did you try more than 1 wattmeter? You could have one that is out of calibration and could be putting out more than 225 watts but you think it is less.....just a thought as to why your getting the error.RTESTP25 wrote:UHF 225 Watt Quantro has power output problem at rated power.Cannot get more that 200 Watts Output in power output calibration without getting Error 4124 HC11 Driver_overdrive_alarm.FPA and IPA Currents on metering is correct and balanced.What Stage is this error message indicating a problem with?
-
Batwings21
- Posts: 930
- Joined: Fri Jun 23, 2006 11:21 am
Re: Quantro Power Output Problem on Repeater
Many non-slug type meters are not that accurate at that high a power level, try another meter.
Re: Quantro Power Output Problem on Repeater
I checked with 2 Bird Wattmeters with 250 watt slug and at 100 watts with 2 100 watt slugs and error was low by a few watts between all slugs.