Quantar Programming Question

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
commstar
Posts: 29
Joined: Thu Feb 13, 2003 2:19 pm

Quantar Programming Question

Post by commstar »

Q: Can the typical VHF Quantar be programmed with both transmit and receive only 'TX inhibit" conventional channels simultaneously?
Top
User avatar
Bill_G
Posts: 3087
Joined: Thu Sep 17, 2009 5:00 am

Re: Quantar Programming Question

Post by Bill_G »

I think we need you to restate your question. Or explain your goal.
Top
User avatar
bezking
Posts: 287
Joined: Sat Jun 23, 2007 4:26 pm
What radios do you own?: /\/\

Re: Quantar Programming Question

Post by bezking »

I think he is asking if, when using a Quantar as a base station, if some channel can be set to TX Inhibit, but some other channel can be transmitted on...

Am I close?
The bandsplit is only a suggestion.

Image
Top
RKG
Posts: 2629
Joined: Mon Dec 10, 2001 4:00 pm

Re: Quantar Programming Question

Post by RKG »

Answer to the question is yes, if the question is can I program a multi-channel Quantar with one or more talk capable channels and one or more RXO channels. Bear in mind you will need some mode of changing channels, which in a Quantar is doable but not simple.
Top
Post Reply

Return to “Radio Programming”