XTS1500 Programming issue

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
egermaine
New User
Posts: 2
Joined: Wed Mar 11, 2009 5:41 pm

XTS1500 Programming issue

Post by egermaine »

Have a problem I hope someone can help with... Purchased new XTS1500 1.5 and programmed codeplug with no issues. Made minor change and while writing to radio the 2nd time got a write error before completed. Radio displays "fail 01/82" error on screen and does nothing else. Any way to reset? Any ideas? Thanks in advance!
Top
User avatar
Mfire39
Moderator
Posts: 1331
Joined: Sat Jan 17, 2004 8:53 am
What radios do you own?: APX

Re: XTS1500 Programming issue

Post by Mfire39 »

What firmware version does the radio have? You can try re-writing to it a few times and see if that clears it up... If it has firmware R11.00.00, and re-writing to it multiple times doesn't clear it, it needs to go under the knife for some surgery..

-Marc
Stupidity creates job security!

If your radio has old firmware, programming it with the latest CPS will not add any new features unless you have the latest firmware to match..

CPS = Customer Programming Software, Not CPS Software.
Top
egermaine
New User
Posts: 2
Joined: Wed Mar 11, 2009 5:41 pm

Re: XTS1500 Programming issue

Post by egermaine »

Charged a fresh battery and gave it another try. After multiple attempts radio finally took original code plug. All is well for now... Thanks for your help Mark.


Eric
Top
Post Reply

Return to “Radio Programming”